Description
Eco Battery Cluster Display Replacement for ICON EV 2021-2023 Golf Cart. Disclaimer: Works for ICON EV models from year 2021-2023 with Eco Battery Lithium Batteries.
Dealer Alert Be sure to Purchase an Eco Tech Tool!
This will help with programming the battery, controller and display to the proper gear ratio.
Please Note: This display is designed specifically for Eco Battery Lithium Batteries!
Revitalize your ICON EV 2021-2023 Golf Cart with our cutting-edge Eco Battery Cluster Display, designed specifically for models from the year 2021-2023 . Eco Battery Cluster Display prominently shows speed, battery level, mileage, and voltage, enabling effortless monitoring and maintenance. This vital information ensures drivers stay informed about their vehicle's condition, promoting longevity and reliability of their ICON EV 2021-2023 Golf Cart.
The installation process is streamlined with our easy-to-follow instructions, from connecting the CAN adapter to routing the Eco Battery meter cable, ensuring a seamless integration. Elevate your cart with a product that combines efficiency, compatibility, and simplicity, making it a must-have for any ICON EV.
This Digital Display effectively replaces the CAN LCD State of Charge (SOC) Meter! See Image below for reference!
BATTERY VOLTAGE
The voltage will vary based on the current load or charge placed on the battery.
STATE OF CHARGE (SOC)
The state of charge is displayed in percent. 0% = empty and 100% full.
BATTERY CURRENT
Discharge current (in amps) is diaplayed as a negative number.
Charging current (in amps) is displayed as a positive number.
METER CALIBRATION
The Eco Battery Display does not require calibration by the end user. The display performs a
self-calibration at the end of each full charge cycle. Accuracy is +/- 5%.
Please Note: Avoid running the battery completely dead. Although the BMS protects against detrimental discharge,
it is not advised to run your battery below 20%. When driving your cart, be aware of your state of charge,
just as you would monitor your vehicle's fuel gauge. The further you are from a charging location, the
more battery you should reserve.
it is not advised to run your battery below 20%. When driving your cart, be aware of your state of charge,
just as you would monitor your vehicle's fuel gauge. The further you are from a charging location, the
more battery you should reserve.
Installation Instructions:
1. Unplug both connectors from old cluster.
2. Insert brown and blue wire pins of CAN adapter (4 pin molex) into the factory 20 pin connector as shown.
3. Route the Eco Battery meter cable from battery to cluster area
4. Plug 90 degree end of meter cable into battery COM port
5. Plug 4 pin molex of meter cable into CAN adapter you just installed.
